Startseite · Forum · CAN Module · Shops · Katalog · Pressearchiv · Downloads · Videos · WebLinksDienstag, 15. Juli 2025
Thema ansehen
 Das CAN digital Bahn Projekt > ZCAN-Module
 Allgemeines rund um den ZCAN
Vorheriges Thema

 
Autor Märklin MS2 ---> Z21   1 # 3 top
Fredde




Beiträge: 4

Ort: Sweden
Eingetreten: 14.03.14
Status: Offline
Eingetragen am 26.02.2020 17:18  

Hello everyone

I have previously purchased CC snitte to my Märklin MS-2.
Also have the Windigipet on my computer that controls everything.
Due to lack of space, I have had to switch to N-scale and have now considered changing from Märklin to Roco Z21.

So now to my questions.
What do I need to get from CDB to connect to a Z21?
Can I use my products I already bought from CDB, as is, or is everything worthless now? (Has the gray series.)

One of the main reasons to change from Märklin to Z21 is that Märklin delivers too high voltage on the track.
Others here may have more reasons why I need to change central unit?

At Z21 you can select output voltage. (N-Scale DCC 12v (max 14v))
But maybe there are other ways to change the output voltage, so I don't have to change the central unit?



Sincerely

Fredde

 
Autor RE: Märklin MS2 ---> Z21   2 # 3 top
Thorsten
Site Admin


User Avatar



Beiträge: 2316

Ort: in der Lampe
Eingetreten: 03.06.10
Status: Offline
Eingetragen am 26.02.2020 20:29  

Hallo Fredde,

Märkln hat letztes Jahr extra dafür unter dem Namen Trix ein neues Netzteil angeboten, damit für N nur noch 15 Volt am Gleis liegen. Möchte Du nur 12 Volt am Gleis haben, dann verwende einfach ein Netzteil mit 12 Volt. Die Gleisbox arbeitet bis runter mit 12 Volt ohne Probleme. Du must deswegen nicht umsteigen!

Die grauen Module arbeiten leider nicht an der Z21, denn der CAN ist ganz anders. Ich habe bis heute keine Lösung gefunden, die Modle für beide Welten auszulegen, so gerne ich das würde. Denn die ganz neuen könnten es theoretisch, nur geht das mit der Steckerbelegung leider nicht. Die hat ROCO Zimo ganz anders gemacht.


Schöne Grüße

BR96 Thorsten

 
Autor RE: Märklin MS2 ---> Z21   3 # 3 top
Fredde



Threadstarter

Beiträge: 4

Ort: Sweden
Eingetreten: 14.03.14
Status: Offline
Eingetragen am 26.02.2020 22:17  

Hi Torsten

Thanks for your reply.

I was pleased to hear that it is possible to lower the voltage in such a simple way.

I hope you come up with a solution in the future so we users will not be limited to a few central units.

Thanks again.


/ Fredde

 
 
Springe zu Forum:
Ähnliche Themen wie "Märklin MS2 ---> Z21" [78]
Thema Antworten Letzter Beitrag
Märklin Bahnübergang K-Gleis 7592K - was benötigt?
Allgemein
5
8293 Hits
08.03.2020 17:57
Stephan
Neueinstieg Digitale Steuerung Märklin
Starten mit CAN-digital-Bahn
5
14045 Hits
06.01.2016 23:11
AndreasWB
Rückmeldung bei Märklin Drehscheibe 7186
Allgemein
5
3221 Hits
23.06.2024 19:22
DRD
StromSniffer 3a + Märklin C-Gleis
StromSniffer
0
3725 Hits
21.02.2021 10:32
belue
Märklin M-Gleis Weichen
WeichenChef
1
5949 Hits
16.12.2013 16:41
Thorsten
Weitere ähnliche Theme wie "Märklin MS2 ---> Z21"
Copyright 2010 - 2025 by Sven Schapmann